I actually wet sanded the wheel pant halves and nose hatch door with 240 grit last night… here’s the pic of that work today.

This morning, before Jess and I left out for our west coast trip, I wet sanded the top of the canard 240 grit with it mounted on the bird.

And then removed the canard to wet sand the bottom side also with 240 grit.

Finally, I wet sanded the bottom cowling with 180 grit.  It will need a bit more fill here and there, thus the courser sandpaper.

I ran out of time to sand the belly RAM air scoop, so it will be my test piece to see how a multi-day cure of epoxy primer sands out on a surface.

I’ll be back at it in less than a week.