As I’ve transitioned into working on the firewall, I wanted to grab a couple of shots to show my efforts in painting the canopy and the inside cockpit.

Here is the canopy with all the inside and exterior tape, paper and plastic removed, except for the protective saran wrap I leave on there until it gets to the hangar.

Although the inside of the cockpit is not visible, clearly all the protective plastic and tape have been removed.  After the firewall is in place I will then work a bit on rollbar to get it finalized for install (some welding for camera attach points then final paint).

I am gearing up to start all the electrical component and instrument panel install as well.