I started out today by testing the clearance inside my Right wing root for the Aileron Tube Bellcrank (CS-132) that I purchased from the Cozy Girrrls.  There is a possible clearance issue if not enough foam is removed from the bottom edge of the wing root.  I mounted the the CS-132 to the aileron bellcrank bearing tube (CS-152) and then slid that into the aileron tube bearing assembly that I had just mounted to the wing root via Clickbonds (click here for info from the Cozy Girrrls on Clickbonds).

Fortunately for me I had measured correctly so I had no clearance issues with my Aileron Tube Bellcrank, and it rotated freely in both directions.