I had yet another very busy day in prep for my upcoming holiday adventures, again getting nearly nothing done in the shop.
I did carefully remove all the wood supports and straps that secured cylinder #1 and #4 baffles in place during glue cure.
First off though, here is a pic of the elusive frontside baffle on cylinder #3. I finally remembered to grab a shot!
And here we have the baffle now secured to the aft side of cylinder #1.
Finally, here is the baffle for the front side of the cylinder #4.
That’s all I have to report for today. I do plan on machining the standoff supports for the aft-side baffle on cylinder #2 ASAP to get that mounted. Then it will back to the top center area on each side of the engine to get the inter-cylinder baffle pieces installed.