I’ve spent the last few days prepping for my major project update video.
Besides giving the workshop a good cleaning and organizing, I also mounted the canard, canopy, aft nose/ avionics cover and nose hatch door. I also put the front seat cushions and temporarily taped the headrest pads in place.
I also pulled tape off the canopy, wingtip NAV/strobe lights and a number of other places.
I vacuumed out the engine compartment and wiped down a good bit of the engine components.
I also mounted the wheel pants (airing up the tires first), RAM air scoop and prop spinner.
As you can see in the background, I also hung sheets of plastic around the bird to mitigate the dust from getting everywhere when I sand the micro finish to contour on all the top surfaces.
Although I did record a couple segments of the major project update video last night, I knocked out the remainder of the video this evening.
I then got to work editing the video.
Tomorrow I plan on having the video edited, complete and uploaded to YouTube, at which time I’ll get back to work on the plane.